How to Flash MTK Phones Using SP Flash Tool

What is SP Flash Tool?

SP Flash Tool also known as Smartphone Flash Tool is the major service tool designed for flashing and unbricking Android devices powered by MTK chipset. The tool can be used to flash partitions in whole or parts, upgrade and downgrade MTK powered Android devices.

On this page, we provide you with step by step guides on how to flash MTK Android devices using SP Flash Tool which is one of the most common MTK Android service tools for flashing.

How to Flash MTK Android Devices Using SP Flash Tool

1. To flash MTK Android devices using SP Flash Tool, first, Download SP Flash Tool here. You may see the installation instructions on the page where you downloaded the SP Flash Tool.

2. Now, download USB VCOM drivers from here. Also, see the USB VCOM drivers installation instructions on the page.

3. Then, download the MTK device firmware here. NOTE: the firmware to be downloaded has to be specific for the device you want to flash. Once downloaded, extract the firmware onto a folder on your PC.

4. Now, RUN (Launch) SP Flash Tool on your PC. Preferrably, you should launch/open SP Flash Tool as admin on your PC.

5. Now, locate the download tab and Click it.

6. Once SP Flash Tool GUI is loaded and you're on the Download Tab, click Scatter Loading.

7. Now, navigate to the folder where you saved the firmware you wish to use for flashing the phone. In that folder locate and click scatter-file.

8. Mark all the firmware partitions loaded except the Preloader, cache and the Userdata.

9. Click Download.

10. Now, Power off the device or remove battery from it; whichever is possible.

11. Now you may connect the device to your PC and tap the Power button just once.

12. Now, watch SP Flash Tool progress bar until it completes the whole operations.

13.Once it finishes, SP Flash Tool will display a green circle with success message. Succeeded! You have just succeeded at flashing your MTK Android device using SP Flash Tool.


share this